Installing solar panels on a commercial or strata roof isn’t just an electrical job — it’s a roofing job first. A poorly planned solar installation can compromise weatherproofing, void roof warranties, and create long-term maintenance headaches if penetrations, flashings, and structural loading aren’t handled correctly. Commercial and Strata Roofing Group provides expert solar panel roofing services across Sydney, preparing, reinforcing, and repairing roofs to support solar arrays safely and ensuring every mounting point stays completely watertight. Our team works on office buildings, warehouses, retail premises, and residential strata complexes throughout Greater Sydney, delivering solar-ready roofing that complements our full range of commercial roofing services.
Solar installers are experts in electrical systems and panel efficiency, but they aren’t always roofing specialists, which is why so many solar-related leaks trace back to poorly sealed mounting brackets and rushed penetration flashing. Every bracket, rail, and cable entry point fitted to a roof creates a potential leak path if it isn’t flashed and sealed to proper roofing standards, and on older roofs, the added weight and foot traffic involved in installation can accelerate wear on tiles, sheeting, and membranes that were already nearing the end of their service life. We regularly identify these issues during our roof condition report assessments, often on roofs where solar was installed without proper roofing involvement.
That’s why we work alongside solar installers, electrical contractors, and property managers to ensure the roofing side of every solar project is handled to a professional standard, from pre-installation structural assessment through to final weatherproofing sign-off. Whether your roof needs reinforcement before panels go up, repairs after a solar installation, or a complete roof replacement designed with solar mounting in mind, our team ensures the roofing and the solar system work together rather than against each other, an approach closely linked to our roof flashing repairs service.
Before any solar array goes up, it’s critical to confirm the roof structure can safely support the additional load of panels, mounting frames, and installer foot traffic. We assess rafters, purlins, and roof sheeting condition, identifying any areas that need reinforcement or repair before installation begins, drawing on the detailed findings we typically capture through our formal roof condition report process.
Older commercial and strata roofs weren’t always designed with solar arrays in mind, and additional structural support is often needed to safely carry panel loading. Our team carries out targeted reinforcement works, strengthening roof framing and sheeting where required, ensuring the roof meets the structural demands of the solar system for decades to come, work that ties in closely with our commercial roof repairs division.
Every bracket and rail penetration fitted for a solar array needs to be properly flashed and sealed to prevent water ingress, using purpose-made flashing solutions suited to the specific roofing material. We flash and seal mounting points to the same rigorous standard applied across all our roof flashing repairs work, protecting your roof from the leaks that so often follow poorly executed solar installations.
Metal roofing is one of the most popular substrates for solar installations thanks to its strength, longevity, and compatibility with standard mounting systems. We install and repair colorbond roofing specifically prepared for solar arrays, ensuring correct sheet profile, fixing points, and structural support are in place before panels are mounted.
If solar panels have already been installed and you’re noticing leaks, staining, or damage around mounting points, our team can identify the cause and carry out targeted repairs without needing the entire system removed. We regularly resolve solar-related leaks as part of our broader roof leak repairs service, restoring proper weatherproofing around existing installations.
Large commercial and industrial roofs are increasingly being fitted with sizeable solar arrays to offset energy costs, and these projects demand careful coordination between roofing and electrical trades across a much larger surface area. We manage roofing works for commercial-scale solar projects as part of our wider commercial roofing services, ensuring the roof itself is fully prepared and protected throughout installation.
Strata buildings pursuing common property solar installations need roofing works coordinated carefully with body corporate approvals, access arrangements, and resident communication. We work alongside strata managers and solar installers to prepare and protect the roof throughout the project, an approach that integrates naturally with our dedicated strata roofing services.
We inspect the existing roof structure, sheeting or tile condition, and framing to confirm it can safely support the proposed solar array, identifying any works required before installation.
Where needed, we carry out structural reinforcement or roof repairs to ensure the roof is fully prepared to support panel loading and installer access safely.
We liaise directly with your chosen solar contractor to align roofing preparation and installation timing, ensuring a smooth, well-coordinated project from start to finish.
Once brackets and rails are in place, we flash and seal every penetration point to a professional roofing standard, eliminating the leak risk associated with rushed solar fit-outs.
After installation, we carry out a thorough inspection of all mounting points and roof penetrations, confirming the roof remains fully watertight under the new solar array.
We provide documentation confirming the roofing works completed and offer guidance on ongoing maintenance to keep both the roof and solar system performing well long term.
Our solar panel roofing teams service commercial and strata properties throughout Greater Sydney, including:
We provide solar panel roofing services across Canterbury Bankstown, Inner West, Upper North Shore, Lower North Shore, Parramatta, Northern Beaches, The Hills District, Eastern Suburbs, Ryde, and Sutherland Shire.
Do I need a roofing contractor as well as a solar installer?
Yes, involving a roofing specialist ensures mounting points are properly flashed and sealed, and that the roof structure can safely support the array, reducing the risk of leaks and warranty issues down the track.
Will solar panels void my roof warranty?
This depends on the roofing product and how the installation is carried out. Having a qualified roofer prepare and flash the roof correctly, in line with our roof flashing repairs standards, helps protect existing warranties.
Can my roof support the weight of a solar array?
Most modern roofs can support solar loading, but older or ageing roofs may need reinforcement. A structural assessment, similar to our roof condition report, will confirm what’s required.
I already have solar panels and now have a leak — can you help?
Absolutely. We regularly repair leaks caused by poorly sealed solar mounting points as part of our roof leak repairs service, without needing to remove the existing panels in most cases.
Should I replace my roof before installing solar?
If your roof is nearing the end of its life, it’s generally more cost-effective to replace it before installing solar, avoiding the expense of removing and reinstalling panels later. Our commercial roof replacement team can advise on timing.
Can you coordinate directly with our solar installer?
Yes, we regularly work alongside solar contractors and electricians to ensure roofing and installation works are properly sequenced and coordinated for a smooth, leak-free result.
Do you provide solar roofing support for strata buildings?
Yes, we assist strata committees and managers with roofing preparation and repairs for common property solar installations, as part of our broader strata roofing services.
How often should a solar-fitted roof be inspected?
We recommend periodic inspections around mounting points and flashings as part of a broader roof maintenance plan, catching any early signs of sealant degradation before they lead to leaks.
Commercial building owners, strata committees, and solar installers across Sydney trust us to handle the roofing side of solar projects because we understand exactly where things go wrong when roofing and solar trades aren’t properly coordinated. We treat every mounting point, penetration, and structural connection with the same care and precision applied across our full commercial roofing services and strata roofing services offering, protecting both the roof and the investment in solar technology above it.
We carry comprehensive insurance, provide clear written quotes, and work cooperatively with solar contractors and electricians to keep projects on schedule and fully weatherproof. Whether you’re preparing a roof for a new solar array or fixing leaks from an existing installation, our team delivers reliable, lasting results.
Request Your Solar Panel Roofing Assessment
If you’re planning a solar installation or dealing with leaks around existing panels, get the roofing side right from the start. Contact Commercial and Strata Roofing Group for a thorough assessment and a clear, honest quote.
Get in touch for expert solar panel roofing services across Sydney.
Trusted solar panel roofing preparation, flashing, and repair services throughout Greater Sydney.
Need more information?
Your Local Roofers Pty Ltd trading as Commercial and Strata Roofing Group
PO Box 610, Wahroonga NSW 2076
Copyright © 2026 Your Local Roofers trading as Commercial and Strata Roofing Group. All rights reserved.
Fill out the form below, and we will be in touch shortly.
